Holds all bottles up to 88 mm (dia.). Plastic, glass or metal bottles can be securely filled in this way. Angle steplessly adjustable up to 90°.

Suitable for use in oceans, deep lakes and corrosive waters

A convenient and affordable device for collecting quarterly first flush storm water grab samples in compliance with EPA sampling requirements.

Sample at specific depths between 3 and 600 feet. Cole-Parmer™ Wildco 1510-C20 Kemmerer Water Sampler features an acrylic bottle with silicone end seals.

Sample at specific depths between 3 and 600 feet.

Use this solid braided line with sampling equipment that weighs less than 75 lb (34 kg)

Molded-in stacking ribs prevent beakers from sticking together when stacked

Use this disk to determine turbidity or degree of visibility in natural water supplies. Cole-Parmer™ LaMotte™ Secchi Turbidity Disk features braided, stretch resistant lines marked at half and full meter intervals up to 20 meters.

For accessing fluid flow in deep manholes and hard-to-reach subsurface sampling areas

For convenient gathering of subsurface water samples for pollution testing from spillways, boats or docks without entering the water. Assists in conforming to procedures as described in U.S. EPA Handbook for Monitoring Industrial Wastewater.

Dipping Vessel for taking all-layer samples from tanks, tank wagons, water courses, water purification plants.

Stainless steel sampling dipper with a completely closed, extended handle.

Operate this sampler with ease by simply lowering the sampler to the required depth and then pulling it out. Sampling Systems™ Deep Water Sampler is ideal for sampling at large depths.

Beaker with scraper, contents 1000 ml. Ideal for powder, granules, pastes, mud.

The Deep Water Sampler takes liquid samples from large depths, taking a sample at the point you start pulling the handle upwards. This simple operation means you lower to the required depth then pull it out.

Transportable, hose pump for liquids, independent of mains power. Ideal for sampling from barrels, tanks, wells, water separators and sewage and purification systems.Vampire is packed in a handy transport case with: drive unit, two rechargeable batteries, battery charger, LED lamp, bottle holder, bottle LDPE 250 ml, hose pump and 5 m hose made of PE.

The beaker is adaptable to different container shapes by adjustable angle setting (up to 90°).

Scoop for aggressive liquids, complete with strong handle, entirely made of polypropylene.

These disposable tubes can be immersed absolutely vertically into the container.

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Specially developed for viscous substances such as slurries, silt, wet clay and soil samples, soil sediments, oils, emulsions, creams etc.

This beaker automatically swings to a horizontal position. Nothing can be spilt. Suitable therefore for deep and narrow shafts (150 mm dia.). Designed for use with the Buerkle™ Telescopic Rod.

Sampler for ground water samples from wells, pits and other sources.

Aids in obtaining ground water samples from wells, pits and other sources.